Advanced digital planning approach using a 3D-printed mock-up. A case report.

OBJECTIVE: A diagnostic mock-up is a key tool that allows a preview of the outcome of an esthetic restoration. With recent developments in CAD/CAM technology, it is important to understand the pros and cons of chairside digital dentistry and the restorative materials used. The aim of the present case report is to describe in detail the use of a 3D-printed mock-up fabricated from a polymer-based material for an esthetic treatment plan within a fully digital workflow. CASE REPORT: A 45-year-old female patient presented at the clinic concerned about her esthetic appearance and the color of her anterior incisors. After a conclusive diagnosis, a restoration was planned using ceramic veneers from maxillary premolar to premolar. For a preview visualization of the outcome, an intraoral scanner was used to obtain 3D images and to allow the design of a digital smile. The template STL file was exported to a 3D printer and a 0.6-mm mock-up in A3-shade 3D resin was produced after 25 min. The mock-up was tested through a try-in and approved by the patient. As a result, the printed mock-up was considered predictable and reliable for the final restoration. CONCLUSIONS: The ease, speed, and reduced costs derived from the digital workflow, in conjunction with the accuracy of the mock-up, made the procedure highly efficient and recommendable.

Radiological, histological and clinical side effects of incisor trimming in rabbits.

INTRODUCTION: Incisor malocclusion in rabbits (Oryctolagus cuniculus) is a common clinical problem seen in general practice. Given that the growth rate is about 2 mm per week, a lack of wear quickly leads to feeding difficulties and soft tissue injuries. Therefore, pathologically elongated incisors must be shortened every three to six weeks. The goal of this study was to assess the potential adverse effects on dental and periodontal tissues associated with the three most commonly used trimming methods: nail cutter, diamond-coated cutting disc and diamond burr. The left mandibular incisor of 28 healthy New Zealand rabbits was subjected to four trimmings with one of the three cutting methods. After the fattening period, the mandibles were collected and both mandibular incisors were investigated on dental radiographs, micro-computed tomography scans and histological sections. Dental and periodontal tissue changes were evaluated. This study allowed a more accurate statement of the potential short-term adverse effects of the three trimming methods. At the clinical level, the nail cutter caused the formation of an irregular occlusal surface with sharp edges. Both engine-drive methods allowed the attainment of a smooth surface but the disc was less accurate. Histological evaluation revealed that the primary modifications, including coronal fractures, periodontal ligament widening and inflammation, reparative osteodentine, paracementosis and biofilm accumulation, were found in the nail cutter group.

INTRODUCTION: La malocclusion des incisives chez le lapin (Oryctolagus cuniculus) est un problème clinique courant en médecine générale. Étant donné que le taux de croissance est d'environ 2 mm par semaine, un manque d'usure entraîne rapidement des difficultés d'alimentation et des lésions des tissus mous. Par conséquent, les incisives pathologiquement trop longues doivent être raccourcies toutes les trois à six semaines. L'objectif de cette étude était d'évaluer les effets négatifs potentiels sur les tissus dentaires et parodontaux associés aux trois méthodes de taille les plus couramment utilisées: le coupeongles, le disque de coupe diamanté et la fraise diamantée. L'incisive mandibulaire gauche de 28 lapins néo-zélandais en bonne santé a été soumise à quatre tailles avec l'une des trois méthodes de coupe. Après la période d'engraissement, les mandibules ont été prélevées et les deux incisives mandibulaires ont été examinées sur des radiographies dentaires, des examens micro-tomodensitométriques et des coupes histologiques. Les modifications des tissus dentaires et parodontaux ont été évaluées. Cette étude a permis de mieux cerner les effets indésirables potentiels à court terme des trois méthodes de coupe. Au niveau clinique, le coupe-ongles a entraîné la formation d'une surface occlusale irrégulière avec des bords tranchants. Les deux autres méthodes de taille permettent d'obtenir une surface lisse, mais le disque est moins précis. L'évaluation histologique a révélé que les modifications primaires, y compris les fractures coronaires, l'élargissement et l'inflammation du ligament parodontal, l'ostéodentine réparatrice, la paracémentose et l'accumulation de biofilm, ont été trouvées dans le groupe coupe-ongles.

Influence of alveolar bone thickness and bucco-palatal inclination on root resorption of lateral incisors in unilateral maxillary impacted canines: a retrospective observational study.

BACKGROUND: This study aimed to investigate the potential associations between alveolar bone thickness, bucco-palatal inclination of maxillary lateral incisors, and lateral incisor root resorption in patients with unilateral maxillary impacted canines (UMICs). METHODS: A total of three hundred and five subjects (120 males, 185 females; mean age, 16.39 years; standard deviation, 4.04) with UMICs were included. Canine position and root resorption were assessed using CBCT. UMICs were divided into palatal, buccal and mid-alveolus groups (PICs, BICs and MAICs), with 117, 137 and 51 subjects, respectively. Alveolar bone thickness and bucco-palatal inclination of lateral incisors were measured using the Dolphin software. RESULTS: The prevalence of lateral incisor root resorption was significantly lower in the BICs (13.9%) than MAICs (29.4%) and PICs (29.1%). Alveolar bone thickness of the apical area was smaller in UMICs with lateral incisor root resorption than no resorption in both PICs (8.33 ± 1.64 vs 10.53 ± 2.55 mm) and BICs (8.94 ± 1.85 vs 10.76 ± 2.28 mm). Furthermore, lateral incisors on the impacted side were more buccally inclined in PICs with lateral incisor root resorption than no resorption, while in both BICs and MAICs, there was no statistical difference between lateral incisor root resorption than no resorption. Moreover, alveolar bone thickness of the apical area, rather than bucco-palatal inclination of lateral incisors, was significantly correlated with lateral incisor root resorption both in PICs and BICs. CONCLUSIONS: Lateral incisor root resorption is less common in BICs. Thinner alveolar bone thickness at the apical area of lateral incisors can be considered as a potential risk factor for lateral incisor root resorption in UMICs.

Evaluation of Bone Growth around Autotransplanted Teeth Using Cone-Beam Computed Tomographic Images.

INTRODUCTION: The aim of this observational study was to evaluate bone growth at the recipient site of autotransplanted teeth using cone-beam computed tomography (CBCT) images and to compare it to the control tooth. METHODS: Bone growth was measured on CBCT images obtained from the anterior region of the maxilla, which received a single transplant of immature premolars due to early loss of the central incisor. The results were compared to the bone growth of contralateral central incisor that served as control. The sample consisted of 13 autotransplanted teeth and 13 control teeth. It was determined the thickness of the buccal bone of the marginal ridge, the thickness of the palatal bone of the marginal ridge, the height of the maxillary bone, and the thickness of the maxillary bone at its mid-height. The measurements were analyzed statistically, adopting a significance level of 5%. RESULTS: The mean interval between the dental autotransplantation surgery and the CBCT scan was 16.2 years. The mean thickness of the buccal bone of the marginal ridge, thickness of the palatal bone of the marginal ridge, height of the maxillary bone, and thickness of the maxillary bone at its mid-height were, respectively, 0.85, 0.94, 19.6, and 8.85 mm for autotransplanted teeth and 0.79, 1.09, 18.88, and 8.5 mm for control teeth. There were no significant differences in the bone measurements between autotransplanted and control teeth (P > .05). CONCLUSIONS: The growth of maxillary bone in the region that received the autotransplanted tooth was proportional to that of maxillary bone that supports the contralateral tooth. Thus, autogenous transplantation is efficient in maintaining the bone architecture at the recipient site.

Cone-beam Computed Tomography Analysis of the Root Canal Morphology of Mandibular Incisors Using Two Classification Systems in a Spanish Subpopulation: A Cross-Sectional Study.

OBJECTIVE: This study evaluated the root and canal morphology in permanent mandibular incisors teeth using cone-beam computer tomography imaging in a Spanish subpopulation, and compared these findings with ipsilateral (similarity) and contralateral (symmetry) incisors. In addition, the position of canal splitting was measured. METHODS: A total of 229 datasets comprising four mandibular teeth each (n=916 incisors) were analysed using Vertucci and Ahmed et al. classifications, and, the similarity and symmetry were calculated. The distance from the cemento-enamel junction (CEJ), and the most coronal canal divergence was measured (if present). The role of sex was also assessed. The Cochran Q Test, LOGIS PROC in SUDAAN, Chi-square, and Kappa were used for the different comparisons. A p-value of less than 0.05 was considered significant. RESULTS: All incisors were single-rooted and no significant differences regarding root canal morphology were found according to the sex of the subjects included in the database. The most common morphology was Vertucci type I/Ahmed et al. 1MI1(65.3% for central and 66.8% for lateral incisors respectively), followed by type III/1MI1-2-1 (31% for central and 30.6% for lateral incisors). 1.8% of the samples were considered as non-classifiable with Vertucci but were classified with codes using the Ahmed et al. system. Similarity values were 74.7% for the left side, and 74.2% for the right side, whereas symmetry values were 90% for central and 84.3% for lateral incisors. In the presence of divergences, the main (SD) distances from the CEJ were for type II/1MI1-2-1 3.8+-0.8 (centrals) 4.0+-0.7 mm (laterals); for type V/1MI1-2 this value ranged between 6.0+-1.8 and 5.5+-1.5 mm, whereas values for 1MI1-2-3-2-1 were 1.8 and 2.1 mm. No significant differences were found when the position of the most coronal divergence was compared between lateral and central incisors for the different morphologies. CONCLUSION: A high prevalence of Vertucci I/Ahmed et al. 1MI1 configuration was present in mandibular incisors from Spanish individuals. Similarity and symmetry were common, particularly for central incisors. The position of the coronal splitting of the canals varied according to the root canal morphology.

Management options and long-term follow-ups for permanent double incisors: six to eleven-year case reports.

BACKGROUND: Double teeth are dental anomalies that can lead to aesthetic and orthodontic problems. CASE PRESENTATION: This report discusses two cases involving the multidisciplinary management of permanent maxillary left lateral incisors fused with a supernumerary tooth in two girls aged 9 and 10. Following intraoral and radiographic examinations, one was diagnosed with fusion, and the other was diagnosed with concrescence. The crown of the fused incisor was separated using a burs and extracted intraorally. The concrescent incisor was separated along its length using a laser and intentionally replanted extraorally. After a 6-year follow-up, no pathological signs were observed in the fused incisor. However, after an 11-year follow-up, external resorption was observed in the concrescent incisor. CONCLUSIONS: Both incisors remained asymptomatic throughout the observation period. This case report highlights two different and effective methods employed to preserve the natural function, form, and aesthetics of double incisors.

Reliability and safety of miniscrew insertion planning with the use of lateral cephalograms assessed on corresponding cone-beam computer tomography images.

BACKGROUND/OBJECTIVES: Recently, lateral cephalograms have been proposed for guided miniscrew insertion planning. Therefore, the aim was to assess the reliability and safety of such planning on corresponding cone-beam computer tomography (CBCT) images. MATERIALS/METHODS: Intraoral scans, lateral cephalograms, and CBCT images of 52 subjects (even sexes distribution), aged 15.1 ±â€…2.5 years, were included. Miniscrew (n = 104) insertion planning was performed using lateral cephalograms superimposed on the maxillary intraoral scans, while the assessment of their bicortical placement, length in bone, contact with adjacent teeth, incisive canal, and nasal floor perforation was done on corresponding superimposed CBCT images. Moreover, maxillary incisor inclination, crowding, and the maxillary intercanine width were measured. RESULTS: The overall miniscrew length in bone was 7.2 ±â€…1.3mm. Bicortical placement was seen in 58.7% of the sample (38.5% of subjects). Incisive canal and nasal floor perforation was seen in 25% and 21.2% of subjects, respectively. No contact of the miniscrew with adjacent teeth was recorded. A negative significant interaction was seen between the miniscrew length in bone, the percentage of total miniscrew length and maxillary anterior teeth crowding (ß, -0.10, P = .047 and ß, -0.90, P = .006, respectively). Moreover, a positive significant interaction was seen between the incisive canal perforation and maxillary anterior teeth crowding (OR = 1.32, P = .021). LIMITATIONS: Exclusion of subjects with impacted teeth. CONCLUSIONS: Miniscrew insertion planning using lateral cephalograms, despite being safe in preventing contact with adjacent teeth, is limited in achieving bicortical placement and insufficient in completely avoiding incisive canal and nasal floor perforation.

Effects of different patterns of movement for correcting a deep curve of Spee with clear aligners on the anterior teeth: a finite element analysis.

OBJECTIVE: To analyse the anterior teeth effects of clear aligners on five different patterns of mandibular molar movement and to define the most effective configuration to be implemented with clear aligners through finite element analysis. METHODS: A three-dimensional mandibular model with a deep overbite in the mandible was constructed using cone beam computerized tomography (CBCT) data. The model included the mandibular dentition, mandibular periodontal ligaments, attachments, and aligners. Five models were created: (1) configuration A: second molar distalization (0.25 mm); (2) configuration B: second molar distalization (0.25 mm), first molar extrusion (0.15 mm); (3) configuration C: second molar distalization (0.25 mmm), first and second premolar extrusion(0.15 mm); (4) configuration D: second molar distalization (0.25 mm), first molar and first/second premolar extrusion(0.15 mm); and (5) configuration E: second molar distalization (0.25 mm), first molar and first/second premolar extrusion (0.15 mm), first molar and first/second premolar expansion (0.15 mm). RESULTS: In all configurations, the anterior teeth exhibited labial tipping and the mandibular central incisor of configuration E showed the highest labial tipping. Configuration E demonstrated a relatively minor impact on mandibular molars distalization compared with configuration A. Configuration A showed the highest distal displacement value, and configuration E produced the lowest displacement value. Configuration E caused the highest periodontal ligament (PDL) pressure of the central and lateral incisors. The differences in the canines between configurations C and D,were not significant, and the stress distribution differed among the five groups. CONCLUSIONS: All patterns utilizing clear aligners facilitated mandibular molar distalization. Extruding the premolars and second molar distalization at the same time had little impact on second molar distalization; When expansion and extrusion were simultaneously performed during the distalization of mandibular molars, our prime consideration was the alveolar bone on the labial side of the anterior teeth to prevent the occurrence of gingival recession, dehiscence, and fenestration. Due to the lack of consideration for periodontal tissues in this study, clinical protocols should be designed based on the periodontal status of the mandibular anterior teeth.

Local factors relating to mandibular canine impaction: A retrospective study.

INTRODUCTION: This study aimed to investigate the characteristics of impacted and transmigrated mandibular canines and the association existing between them and some local factors, such as degrees of axial inclination of mandibular incisors, skeletal Class, and mandibular symphysis width. METHODS: A retrospective observational study was performed on the medical records and radiographic examination (panoramic radiographs and lateral cephalograms) of 102 orthodontic patients divided into a study group, with at least 1 impacted mandibular canine (51 subjects) and a control group, without mandibular impaction (51 subjects). A chi-square test, t test, and analysis of variance test analysis were used to analyze the data. RESULTS: Unilateral and buccal impaction and the presence of the deciduous canine were the more prevalent characteristics of impacted canines, whereas 39.2% presented transmigration. Furthermore, the persistence of the deciduous canine on the impaction side (P <0.0001) and the mesial axial inclination of the impacted canine (P <0.0001) were found to be statistically significant characteristics. A statistically significant association was found between the impaction of the mandibular canine and mandibular incisor to the mandibular plane angle (IMPA) (IMPA, 95.8°; P = 0.009). An additional statistically significant association was found with transmigrated canines (IMPA, 96.8°; P = 0.024). CONCLUSIONS: The mesialization of the canine cusp and the persistence of the mandibular deciduous canine are characteristics frequently found in the impaction of the mandibular canine. An accentuated vestibular inclination of the mandibular incisors is significantly associated with mandibular canine impaction.

Factors affecting local alveolar bone thickness in unilateral maxillary canine-lateral incisor transposition.

INTRODUCTION: This study aimed to use 3-dimensional data to investigate the factors affecting local alveolar bone thickness in unilateral maxillary canine-lateral incisor transposition. METHODS: Pretreatment cone-beam computed tomography data of 34 patients with unilateral maxillary canine-lateral transposition were imported into Dolphin Imaging software (version 11.8; Dolphin Imaging and Management Solutions, Chatsworth, Calif) for 3-dimensional reconstruction. The age, gender, and type of transposition at the beginning of treatment were recorded. The thickness and height of the transposed canine, the labiopalatal and distomedial distance from the transposed canine to the apex of the lateral incisor, the inclination of the transposed lateral incisor, the apical height of the lateral incisor, and the alveolar bone thickness in the apical plane were measured. Multiple linear regression analyses were applied to investigate the factors affecting alveolar bone thickness in the apical plane of the transposed lateral incisor. Two sample t test were applied to assess the difference of alveolar bone thickness in patients of different ages. RESULTS: The 10 boys and 24 girls had a mean age of 12.26 ± 2.34 years. In all 34 participants, the apical alveolar bone thickness of transposed lateral incisors was significantly higher than that of the unaffected side (P <0.05). Based on multiple regression analyses, factors associated with a wider alveolar bone thickness were as follows: age (ß = -0.237; P = 0.008), the labiopalatal distance from the transposed canine to the apex of the lateral incisor (ß = 0.675; P <0.001), and the inclination of the transposed lateral incisor (ß = 0.048; P = 0.032). Patients aged <11 years had significantly thicker alveolar bone than that of patients aged >11 years (P <0.05). CONCLUSIONS: Patients with younger age, greater lateral incisor inclination, and greater labiopalatal distance between canine and lateral incisor had more alveolar bone thickness. Early treatment permits tooth movement within the thicker alveolar bone.

Distolingual root prevalence in mandibular first molar and complex root canal morphology in incisors: a CBCT analysis in Indian population.

Cone-beam computed tomography was used to understand the possible correlation between the prevalence of distolingual root (DLR) in permanent mandibular first molars (MFMs) and the associated complicated mandibular incisor's root canal morphology (MIs) in an Indian population. A total of 400 scans were evaluated for MFMs and MIs. The prevalence of DLRs and root canal anatomy of MIs were assessed based on Vertucci's classification, and then the sample were grouped according to age, sex and side. Statistical analysis was used to evaluate the possible correlation between the presence of DLRs in the first molar and root canal morphology of incisors. Chi square test was used to evaluate the correlation between the root canal configurations of MIs with the existence of DLRs in MFMs. There was no statistically significant difference between sexes or ages for the prevalence of DLRs in the first molars (p > 0.05), which was 6.62%, with the right side having a greater frequency of DLRs (7.8%) than the left (5.5%). Vertucci Type I canal configuration was most common for the mandibular central (66.75%) and lateral incisors (58.62%). Vertucci Type III was the most common complicated canal morphology, followed by Types V, II, and IV for MIs, with no statistically significant difference in the studied sample's age and sex. (p < 0.05). No association was observed between the presence of DLRs in first molars and complicated root canal configurations in MIs. Taken together, the possibility of complicated root canal configuration in MIs was lesser in the presence of DLRs in MFMs among the Indian population.

Recovery bone formation on radiographic palatal bone dehiscences after incisor retraction with microimplants.

OBJECTIVES: To investigate the difference in labial and palatal alveolar bone thickness and height during the retention period after incisor retraction treatment with microimplant. MATERIALS AND METHODS: A sample of 21 patients (mean age: 17.80 ± 4.38 years) who underwent incisor retraction treatment using microimplants after premolar extraction was investigated. The cone-beam computed tomography images at pretreatment, posttreatment, and retention were used to measure anterior alveolar bone thickness (labial, palatal, and total; at three vertical levels) and height (labial and palatal) and differences in the incisor position during treatment or retention. Repeated-measures analysis of variance with Bonferroni correction was performed to compare the variables at T0, T1, and T2. RESULTS: The maxillary central incisor moved posteriorly by approximately 8.0 mm along with intrusive movement of 1.8 mm after treatment. The alveolar bone thickness significantly decreased on the palatal side and increased on the labial side after treatment. Thereafter, the palatal bone thickness significantly increased and labial bone thickness decreased during the retention period. The palatal interdental bone depressed by incisor retraction showed substantial bone deposition after retention. CONCLUSIONS: Radiographic palatal bone dehiscences on the incisor root and palatal bone depression between the incisor roots were apparent after treatment. This palatal bone loss around the incisor roots noticeably recovered with newly formed bone during retention.

Three-dimensional microanalysis of tooth movement during the first 6 months of orthodontic double retention.

INTRODUCTION: This study performed a 3-dimensional analysis of tooth movement during orthodontic retention to assess the effectiveness of double retention (fixed and removable) in preventing undesired tooth movement. METHODS: One hundred randomly selected patients were included at the initiation of double orthodontic retention with fixed retainers and vacuum-formed splints (recommended to be worn 22 h/d) in both arches. Intraoral scans were performed directly (T0), 1 month (n = 88), 3 months (T2) (n = 78), and 6 months (T3) (n = 66) after retainer bonding. Nine reference points were marked on each tooth in every patient. Subsequent scans were superimposed, and point displacement was calculated. Statistical analysis was performed using the R statistical software (version 4.2.2; R Core Team, Vienna, Austria). RESULTS: Sample size calculation determined at least 55 patients were needed. The total dropout between T0 and T3 was 34 patients (did not show up for appointment). The median absolute displacement value of a single point between T0 and T3 was 0.015 mm. The most stable teeth were mandibular central incisors, whereas the least stable were mandibular molars. Most tooth displacements occurred between T0 and T2, then slowed down significantly. CONCLUSIONS: Double orthodontic retention prevents major tooth displacements in most patients during the first 6 months of retention; however, larger, unpredictable single-tooth displacement may occur in individual patients.

Effect of occlusal hypofunction on centre of resistance in maxillary central incisor using the finite element method.

OBJECTIVES: To determine differences in the location of centre of resistance (Cres) between functional and hypofunctional teeth and to evaluate the relationship between the pulp cavity volume and locations of the Cres, using the finite element (FE) method. DESIGN: Retrospective cohort study. PARTICIPANTS: FE models of right maxillary central incisor, derived from cone-beam computed tomography (CBCT) images of 46 participants, were divided into normal function (n = 23) and hypofunction (n = 23) groups using anterior overbite and cephalometric measurements. METHODS: Measurements of the tooth and pulp cavity volume were made from the CBCT. Cres levels were presented as percentages of the root length from the root's apex. All data were analysed and compared using the independent t-test (P < 0.05). The relationship between the location of Cres and volume ratios were evaluated statistically. RESULTS: The means of the pulp cavity/tooth volume and root canal/ root volume ratio of the maxillary central incisor in the anterior open bite group were significantly greater than those in the normal group. The average location of Cres in the anterior open bite group was 0.6 mm (3.7%) apically from the normal group, measured from root apex. The difference was statistically significant (P < 0.01). There was a significant correlation between root canal/root volume ratio and locations of Cres (r = -0.780, P < 0.001). CONCLUSIONS: The Cres in the hypofunctional group was located more apical than the functional group. As the pulp cavity volume increased, the level of Cres shifted apically.

Alveolar bone morphology in patients with palatally-displaced maxillary lateral incisors before and after orthodontic treatment: A cone-beam computed tomography study.

INTRODUCTION: Palatal displacement of maxillary anterior teeth is common in clinical practice. Previous studies have reported that the labial bone around palatally-displaced incisors is thinner than that around normally-placed teeth. Therefore, it is necessary to elucidate alveolar bone changes after alignment to guide orthodontic treatment. In this study, we investigated the alveolar bone changes around palatally-displaced maxillary lateral incisors before and after treatment, and the effects of extraction and age using cone-beam computed tomography. METHODS: In this retrospective study, 55 patients with unilateral palatally-displaced maxillary lateral incisors were included. Three-dimensional alveolar bone changes were measured at three levels (25%, 50% and 75% of the root length) using cone-beam computed tomography. Group comparisons were made between displaced and control teeth, extraction and non-extraction groups, and adult and minor groups. RESULTS: After orthodontic treatment, labiopalatal and palatal alveolar bone widths decreased at all measured levels. Labial alveolar bone width increased significantly at P25, but decreased at P75. Concavity decreased, while tooth-axis angle, tooth length, B-CEJ and P-CEJ increased. Changes in LB and LP at P75, B-CEJ and P-CEJ were statistically significant. After treatment, the tooth-axis angle on the PD side increased by 9.46°. The change in tooth-axis angle on the PD side was significantly smaller, and LB and LP decreased more at P75, in the extraction group. CONCLUSIONS: Compared to the control teeth, alveolar bone thickness and height for the displaced teeth decreased more significantly after treatment. Tooth extraction and age also influenced alveolar bone changes.

Apical incisor root resorption due to ectopic maxillary canine eruption: Association with time of diagnosis and type of intervention in a retrospective population-based cohort study.

OBJECTIVES: The primary aim was to study upper incisor severe apical root resorption (RR) related to ectopic canine eruption and its association with timing of diagnosis and type of intervention conducted. The secondary aim was to correlate resorption with other dental anomalies. MATERIALS AND METHODS: Digital journals and radiographic material of all ectopic maxillary canines registered in 2012 in the regional public paediatric dental clinics in the Council of Aarhus were inspected retrospectively. Data related to 10 variables were retrieved. Post-treatment radiographs were used for evaluation of incisor RR. RESULTS: A total of 260 ectopic maxillary canines were diagnosed in 2012. The majority were found in the 9-13-year-old age group (0.8% prevalence within the total population). In all, 244 canines were assessed for eligibility and 181 had adequate final radiographs for evaluation of RR. Among ectopic maxillary canines, 9.4% caused severe incisor RR to neighbouring teeth. Timely palpation for canine eruption significantly reduced the odds for upper incisor resorption by 80%. Multiple regression showed that when the permanent canine cannot be palpated and the deciduous has been extracted, delaying the first X-rays was associated with a 38% odds ratio increase for RR for each year of delay after the age of 10 years. No significant associations were found between incisor RR and intervention conducted or other dental anomalies. CONCLUSION: Palpation of erupting maxillary canines is crucial for timely diagnosis of ectopic eruption and initiation of treatment to avoid RR. If the canine cannot be palpated at 10 years of age, radiographic examination is highly recommendable.

Comparison between 2D cephalometric and 3D digital model superimpositions in patients with lateral incisor agenesis treated by canine substitution.

INTRODUCTION: This study aimed to assess the reliability of measurements obtained after superimposing 3-dimensional (3D) digital models by comparing them with those obtained from lateral cephalometric radiographs in patients with lateral agenesis space closure by mesialization. METHODS: Data were collected from premaxillary and postmaxillary dental casts and lateral cephalometric radiographs of 26 patients presenting lateral incisor agenesis and treated with rapid maxillary expanders and space closure by mesialization of the lateral sectors. Sagittal and vertical movements of the incisors and the maxillary molars were evaluated with lateral cephalometric radiographs and digitized 3D models superimposed on the palatal area. Paired sample t tests were used to determine if any significant difference existed between the 2 measuring techniques and between 2 different localizations of superimpositions. RESULTS: Cephalograms and 3D digital model measurements were statistically similar in molars and incisor movements according to anteroposterior and vertical planes. Regarding incisor movements in the anteroposterior plane, measurements derived from second ruga 3D models were significantly greater than those derived from third ruga 3D digital models. CONCLUSIONS: The 3D model superimposition method using the palate as a reference area is clinically reliable for assessing anteroposterior and vertical tooth movement as cephalometric superimposition in patients treated with rapid maxillary expanders and space closure by mesialization.

Three-dimensional volumetric evaluation of root resorption in maxillary anteriors following en-masse retraction with varying force vectors - a randomized control trial.

BACKGROUND: Root resorption in orthodontics is associated with direction and magnitude of force application as primary etiological factors. Well-controlled trials that utilize three-dimensional segmentation to detect volumetric changes in tooth structure are required to assess the quantitative nature of root resorption. OBJECTIVE: To assess the severity of root resorption (RR) during retraction of maxillary anteriors with three different force vectors (with and without skeletal anchorage) via cone-beam computed tomography (CBCT) superimpositions. TRIAL DESIGN: Three-arm parallel randomized clinical trial (RCT). MATERIALS AND METHODS: Forty-two (16 males, 26 females) patients, (17-28 years), in permanent dentition with bimaxillary protrusion were randomly allocated to three groups of 14 patients each using block randomization (1:1:1 ratio) and allocation concealment. En-masse anterior retraction post first premolar extractions was carried out with modified force vectors in the three groups based on anchorage type [Molar, Mini-implant and Infrazygomatic crest (IZC) bone screws]. Volumetric root loss and linear dimensional changes were blindly assessed on initial (T0) and final (T1, end of space closure) CBCT scans. Normality distribution of values was done using Shapiro-Wilk's test. ANOVA and Post-hoc Tukey HSD test were done to compare measurements between groups at significance levels (P < .05). RESULTS: Forty patients were analysed (14, 14, and 12 in three groups). Significant volumetric loss was noted in all groups. Central incisors demonstrated a significant reduction in IZC group (81.5 ± 21.1 mm3 ) compared to conventional (50.1 ± 26.5 mm3 ) and mini-implant groups (76.1 ± 27.6 mm3 ). Canines demonstrated a significant reduction in mini-implant group (108.9 ± 33.9 mm3 ) compared to conventional (68.8 ± 42.5 mm3 ) and IZC groups (103.1 ± 29.1 mm3 ). Regarding linear parameters, central incisors and canines revealed significant root length reduction in both skeletal anchorage groups. Lateral incisors showed no significant changes between groups. CONCLUSIONS: Intrusive force vectors generated during skeletally anchored retraction can predispose anteriors to an increased risk of resorption. Greater loss of root volume was noted in the centrals and canines when retracted with skeletal anchorage. LIMITATIONS: Small sample size and variations during CBCT acquisition. HARMS: Low-dose CBCT scans were taken at T0 and T1 treatment intervals.

Appropriate timing of treatment contributes to better root development of impacted anterior teeth in children.

INTRODUCTION: This study investigated the effects of different timings of orthodontic treatment on the root development of impacted anterior teeth in children. METHODS: The cone-beam computed tomography (CBCT) data of 45 children with impacted anterior teeth were divided into unformed root (UR) group or basically formed root (BFR) group to evaluate root length (RL) and root growth length (RGL) of impacted teeth and contralateral nonimpacted teeth pretreatment and posttreatment. In addition, 22 patients with impacted dilaceration were selected to assess the effects of the crown-root angle and root development stage on RL and RGL. The Student t test, Wilcoxon test, analysis of variance, and multiple linear regression analysis were used for statistical evaluations. RESULTS: The RL of treated impacted teeth pretreatment and posttreatment was significantly shorter than contralateral nonimpacted teeth values (P <0.05). Posttreatment, the RL and RGL of impacted teeth of the UR group were significantly greater than those of the BFR group (P <0.05). The RGL of the dilacerated root in the UR group was considerably higher than in the BFR group (P <0.05). The larger crown-root angle group had a longer posttreatment RL (P <0.05). Multiple linear regression analysis revealed that the Nolla stage of impacted teeth and RL of contralateral teeth pretreatment significantly influenced the RL of impacted teeth posttreatment. CONCLUSIONS: Prompt orthodontic treatment is necessary for children with impacted anterior teeth to release the impacted state and achieve better root development. The root length of a dilacerated tooth continued to develop under treatment, but the crown-root angle partly constrained it.

Root development differences between cleft-adjacent teeth on the cleft side in comparison to their analogs on the noncleft side in patients with nonsyndromic cleft lip and palate who received secondary alveolar bone grafting.

OBJECTIVE: To assess differences in root development between the cleft side (CS) and noncleft side (NCS) for permanent maxillary central incisor and canine longitudinally in patients with nonsyndromic complete unilateral cleft lip and palate (cUCLP) who received secondary alveolar bone grafting (SABG) and to evaluate the effects of SABG on the acceleration of root development of these teeth. MATERIALS AND METHODS: Permanent maxillary central incisors and canines of 44 subjects with nonsyndromic cUCLP who had all their cleft-related surgeries performed by the same surgeon were analyzed retrospectively from chart notes and radiographs. Panoramic and periapical radiographs at time point 1 (T1) (age, 7.55 years), at SABG (time point 2 [T2], 10.13 years), and a minimum of 2 years after SABG were studied. Root development rating scores on the NCS and CS were compared using paired t-tests and analyses of proportions. RESULTS: Mean root development score differences (NCS - CS) for canines and central incisors were greatest at T2 but diminished at time point 3 (T3). A larger proportion of teeth on the CS trailed the teeth on the NCS by at least 1 point at T2 than at T1 or T3, with the smallest proportion being observed at T3. The change in root development scores from T1 to T2 and from T2 to T3 showed relative CS acceleration from T2 to T3, indicating a catch-up of root development of cleft-adjacent teeth after SABG. CONCLUSIONS: Root development of cleft-adjacent central incisors and canines is slow in comparison with their noncleft analogs. Root development of these teeth accelerates following SABG.